Why You Should Take Good Care of Your Tires  

Why You Should Take Good Care of Your Tires  

For the longest time, people relied on the tire’s tread depth to determine when the right time to replace it is. They do the penny test and if the tires are able to pass it, then they assume that it still has a life. Tire ages and its age is a huge factor in determining its lifespan. Ignoring that can be a fatal mistake.  

 

 

Using old tires can be dangerous even if it still has good tread depth. Carmakers recommend that tires should be discarded six years after its manufacturing date. There are many instances when old tires become the cause of fatal accidents. So as far as car tires are concerned, here are some things that you have to note: 

  1. Maintain proper air pressure to keep your tires running longer.

Tire pressure plays an important role in the performance of the tires and the car in general. Be sure that you keep the tire air pressure at its optimum state because that’s one good way to be ensured of safety while on the road.  

  1. Older tires have a higher risk of tread separation.

Sudden and unexpected tread separation can happen for older tires. While it’s a bit expensive to change your tires every five to six years, it’s a maintenance procedure that you shouldn’t skip. It’s for your own safety while on the road.   

  1. Avoid buying used tires. 

Buying used tires may be an economical move but it comes with a lot of risks. For one thing, you don’t know how that tire was maintained so there’s no guarantee that it will work perfectly the whole time you’re using it.  

  1. Always find out how old the tire is. 

Don’t assume that the tire that you’re buying is newly manufactured just because it’s sealed and comes right off the shelf. Sometimes, the tires have been on that shelf for far too long that you only have a few years left into the 6-years-from-the-manufacturing-date timeline. Check the last four digits of the tire’s DOT code. That should tell you how old the tire is. 

  1. Give the tires a thorough check every year. 

Remember the manufacturing date of the tires and when that day comes, be sure to give it a full run through. And that includes your spare tire. Always keep in mind that even if you’re not using your spares, they are still aging.  

If you need help in checking out your tires, seek a professional. There are auto technicians who can assist you in putting your car in its tiptop condition. Simply send in your car for maintenance repairs in their garage every so often and you should be all set.  

Keep in mind that the tires are among the most used parts of the vehicle yet they are also the ones that are most neglected. There are professionals who can make sure that your tires are always in their best condition. If you need further assistance, you can always check out George’s Tire Shop. 

What is the difference between Plaster and Stucco?

If you are reading this article then you might be asking what is the difference of stucco and plaster well here it is.

So plaster versus stucco is there a difference?

The really old question if stucco and plaster has a difference. Technically stucco and plaster are made out of the same materials. But this article is here to shatter that small illusion that stucco and plaster are made out of the same materials.

The more simple explanation for this is as follows: plaster is for interior and stucco is for the exterior. Now you might say “Hey, aren’t they the same thing they are mostly made up of the same materials and you apply them the same way” And yes, they are applied the same way that by using the same methods and techniques and that’s because that is what works the best. Like Stucco application West Palm Beach

The differences:

Stucco is well painted

Stucco is a product that is lime and Portland-based. And for added strength and support it is sometimes mixed with fiberglass strands. The fiberglass acts as structural support to make sure cracks will be found nowhere and chunks won’t fall off. And to add some fun more textures, different types of sand is also added just so you can enjoy your house more.

Plaster is a gypsum-based product and it is going to look wonderful in your home or office. Even though it is slightly softer than stucco, it can and will still hold up for more years than you can count.

To tell you the truth there really isn’t a lot when it comes to the difference between stucco and plaster but you must always remember that they are not the same. But there are some similarities between the two.

For example, if you live in a crowded neighborhood or work in an office and you want some of that peace and quiet the stucco or plaster is a really good thing to have in your space because these things are really good at canceling sounds because after the walls dry, they will create a really tight seal and they won’t allow any pesky sound waves to pass through it so easily.

They can be applied in many ways you can either apply them really smoothly or you can apply them super textured like you can have spikes if you want to not one person can stop you from doing what you want with you plaster or stucco.

But really in the end of the day mixing and applying plaster or stucco is a lot like cooking. Because a little too much of something or a little too less of something will turn out to be bad for the place that you call home and practicing it can be really good for you but either way that wraps up this article and hopefully you found this useful and worth your time be sure to share your new found knowledge to others.

How to Purchase Electric Motors  

The purchase of large electric motors doesn’t come easy, as it’s a job that usually requires the skills and knowledge of a mechanical engineer. Even so, there are certain things that can be done to be assured that you get products and services that are at par with the industry standards.  

Electric Motors

Machines have to work in compliance with IEEE standards to ensure the seamless integration and operation of these devices into your existing systems. These machines can be customized, although buying newly built equipment can get very expensive, even for large companies. If you want a cheaper but more feasible option, you may buy these machines from tradesmen that specialize in the buy and sell of electric motors.  

If you intend to go that route, it’s important that you know the requisites that have to be met in order to assure yourself of the best possible results. One of the things that you can do is to make sure that the company you’re dealing with offers: 

  1. 24-Hour Emergency Support

Newly installed machinery is prone to break down because it may need specific adjustments. It’s important that the company from where you bought the device offers round-the-clock emergency support services so you can be sure that everything will work up to par from the time it is installed until all the work has been done. They should have a support group that can go to your location to make sure that the machine is functioning as intended.  

  1. System Analysis 

All electric motors for sale should follow regular system assessments via 3D modeling, finite element analysis, computation fluid dynamics, and electric motor design. These, plus a complete site walk down, should be provided for by the company from which you intend to buy the machine from. Specifically, ask for this service before buying the equipment to ensure you of a high level of quality and performance.  

  1. Quality Control 

In any manufacturing or industrial system, quality control is essential. Every company engaged in the buy and sell of large electric motors should follow an in-house quality assurance program that comes complete with standardized operating procedures. All of their procedures should work in compliance with the standard that’s approved by all industries.  

  1. Equipment Manufacturing

Many tradesmen who buy and sell large electric motors also have the capacity to manufacture parts and certain equipment that can be used with certain systems. If you need re-manufacturing services, ask them about it. High are the chances that they can provide you with the same services as well.  

The decision to purchase refurbished electric motors may be difficult. But for some companies, it’s the only option. Simply consider the points listed here so you’ll be guided. It’s important that you know what to check, expect, and request for when it comes to these pieces of machinery.  

Dealing only with reputable companies is the key to getting quality products and services. Don’t settle for anything less than the best because the performance of your own business, company, or organization depends on it.